Technical Literature
Mounting Solutions: Toroid Mounts, Components Headers, Bobbins, Shielded Coil Forms and Solderability.
Technical Information
- Ferrite Material Selection Guide (PDF, 221 Kb)
- EMI/RFI Common Mode Filters (PDF, 325 Kb)
- Q Curves for Ferrite Cores (PDF, 1.98 Mb)
- Step Gap “E” Core Swing Chokes (PDF, 115 Kb)
- Common Mode Inductors for EMI (PDF, 125 Kb)
- Curve Fit Equations for Ferrite Materials (PDF, 284 Kb)
- Designing with Planar Ferrite Cores (PDF, 271 Kb)
- A Critical Comparison of Ferrites with Other Magnetic Materials (PDF, 436 Kb)
- Common Mode Filter Inductor Design Software (ZIP, 1.17 Mb)
Micrometals – Iron Powder Cores
- Micrometals Powder Cores Catalog
- Design Guidelines for Iron Powder Cores by Dale Nicol, Micrometals Inc. (28 Kb)
- Practical Construction Tips for Coils Using Iron Powder Cores by Dale Nicol, Micrometals Inc. (58 Kb)
- An Objective Comparison of Powder Core Materials for Inductive Components with Selected Design Examples by Dale Nikol, Micrometals Inc. (242 Kb)
- Iron Powder Cores for Switch Mode Power Supply Conductors by Jim Cox, Micrometals Inc. (4.2 Mb)
- Iron Powder Cores for High Q Inductors by Jim Cox, Micrometals, Inc. (1.3 Mb)
Power Conversion Notes
- Inductor Designs for High Frequencies – Powder Iron “Flux Paths” Can Eliminate Eddy Current (Gap Effect) Winding Losses by Bruce Carsten, Carsten Associates Inc. (91Kb)
- Calculating the High Frequency Resistance of single and double Layer Toroidal Winding by Bruce Carsten, Carsten Associates Inc. (373 Kb)
- Simplified Calculations of Magnetic and Electrical Losses in Unity Power Factor Boost Pre-regulators by Bruce Carsten, Carsten Associates Inc. (2.6 Mb)
Fair-Rite Products – Ferrite Cores
