L32 SERIES

Inches/mm
2 x size
±.005


ASSEMBLY PART NO.
COLOR CODE
MAGNETIC MATERIAL (1)
FREQUENCY RANGE (2)
MATERIAL PERMEABILITY
ASSEMBLY ALnH/turns2 (3)
MAX µh
100 turns
MIN up (4)
100 Turns
TEMPERATURE STABILITY (5)
L32-2-CT-F-2
RED
CARBONYL E
.25-10 MHz
10.0
6.8
68
45
95 ppm/° C
L32-3-CT-F-2
GREY
CARBONYL HP
.02-1.0 MHz
35.0
7.8
78
46
370 ppm/° C
L32-6-CT-F-2
YELLOW
CARBONYL SF
2.0-50 MHz
8.5
6.1
61
38
35 ppm/° C
L32-10-CT-F-2
BLACK
CARBONYL W
10-100 MHz
6.0
5.7
57
37
150 ppm/° C
L32-17-CT-F-2
LAVENDER
CARBONYL
20-200 MHz
4.0
5.2
52
37
50 ppm/° C

1) The iron powder materials are used in a portion of the base, the tuning core and cup core.

2) This represents the frequency range for Q optimization in tuned or resonant circuits. The inductive properties of the material is effective over a considerably wider frequency range.

3) Nanohenries (10-9Henries) per turn squared.

4) The minimum inductance is measured in microhenries (10-6 Henries) per 100 turns with the tuning core tuned out of the winding area but still a part of the assembly.

5) The temperature stability is of the magnetic material, measured in parts per million per degree Celsius (ppm/° C) on a toroidal core and winding. This is only an indication of the temperature stability for a complete wound assembly.


B534-w/CF132
CF132
PB132
B534-w/PB132
TH12-13
C9-33( )
CN432CT

2 TERMINAL ASSEMBLY(6)
COIL FORM BASE ASSEMBLY (7)
BASE ONLY
BOBBIN WINDING FORM (8)
BOBBIN BASE ASSEMBLY
COLOR CODE
THREADED CORE (9)
CUP CORE
SHIELD CAN
L32-2-CT-F-2
B532-w/CF132
B532
PB132
B532-w/BP132
RED
TH12-302
C9-3302
CN432CT
L32-3-CT-F-2
B532-w/CF132
B532
PB132
B532-w/BP132
GREY
TH12-303
C9-3303
CN432CT
L32-6-CT-F-2
B532-w/CF132
B532
PB132
B532-w/BP132
YELLOW
TH12-306
C9-3306
CN432CT
L32-10-CT-F-2
B532-w/CF132
B532
PB132
B532-w/BP132
BLACK
TH12-310
C9-3310
CN432CT
L30-17-BT-F-2
B532-w/CF132
B532
PB132
B532-w/BP132
LAVENDER
TH12-317
C9-3317
CN432CT

4 TERMINAL ASSEMBLY(6)

L32-( )-CT-F-4
B534-w/CF132
B534
PB132
B534-w/BP132
AS ABOVE
TH12-3( )
C9-33( )
CN432CT

6)Complanearity of the two terminal version is not an issue due to the three contact points. The four terminal version's coplanearity will depend on the success of the can tab's (fifth) contact point.

7) The base is molded in thermoset Diallyl Phthalate (DAP). Two terminal (positions 3 & 4) and four terminal (positions 1,2,3 & 4) are available in Allow 42, 90/10 tin plated to MIL-STD 202, 208 for solderability. The CF117 coiform is a glass reinforced polyester tube with 8-32 internal threads.

8) The optional PB132 snap in bobbin is self threading polypropylene. To order, substitute "P" for "F" in the assembly part number.

9) The tuning core is a 6-32 shallow thread coated with Teflon. Fits tuning -Tool-A .

10) The tab on the shield can bend under the base, holding the shield can in place and creating the surface mount connection to the circuit board.


Next

4769 Wesley Drive * Anaheim, California 92807 U.S.A.
Phone (714) 970-0900 * FAX (714) 970-0800
Internet: http://www.lodestonepacific.com

 


Back to Product Index

 

© Innovative Technologies & Lodestone Pacific